TexasThunderbirds - moving - SC yard sale - *pics*

[tbird88]

Moving outa Koko's, piled up lots of spare parts there and at home from 12-13 Super Coupes. Some of 'em are those lil trinkets that ain't no fun to remove from the car, some are more common. No extra charge for dust/leaves/critters, I'll do what I can to remove anything deadly

I have tons more pics to take, been collecting since early 2001 and have way too many parts on hand, will add pics as time allows. Also have a couple of running 90/91 SC's that I would sell reasonably enuff to make it worth someone's time to come get one (or two).

If you've dealt with me in the past then ya know shipping will be as cheap as possible, not here to make money off of that.

Postal Money orders preferred but PayPal is also okay, no extra charge for PayPal. I ship worldwide through USPS, DHL, FedEx, whatever you want.

YES, still fabricating etc and will get back up to speed as soon as I adjust to my new job, just tryin' to find this stuff a good home before it sits around any longer and gets ruined...thanks for lookin',

'bird

NO warranties expressed/implied blah blah etc etc

PIC 1:
Intake hose 10
battery tray 15
gas pedal assy 5
oil cooler hose 5
dash tray liner thingy 5
dead pedal 5
BLUE seatbelt retractors, inertia works fine on both, pair-10
3rd brakelight, light sockets perfect 10
Clutch reservoir 10
Hood cable 15

PIC 2:
Intake hose 89/90 complete 25
IC baffle 20
Drvrside switch assy 10
P/S bracket 10
Overflow tank 5
Pass switch w/lock solenoid (gob in middle of table) 10
Cam position assy 10
Oil cooler hose 5
Rear bumper support 10
PCV lines 10 each

PIC 3:
Fuel rail (incl FPR w/hose) missing 1 injector 25
Master cyl, use as core?, tank ruined 20
Fuse box 5
ARC w/cover 5
5-spd plate 20
Headlight switch w/connector 5
Gas pedal 5
Brake pedal (5-spd?) 20 each

PIC 4:
Fuel rail w/FPR, part of one inj missing 25

PIC 5:
ACR w/cvr 5
5spd clutch brkt support (kinda mangy) 5
Water pump pulley 5
Trans mount 5
Fuel line cvr 5
Switches 2
Boost thingy 5
Crank sensor w/brkt & wires 5
Console wiring 3
Inst cluster connector 2 bucks each
CD connectors 2 each
Hoodlamp wiring 5
Early oil dipstick 10
PCV crossover tube (rough but no holes) 5
Cruise hose w/switch 5

 

[rickbtbird]

Exhaust Manifolds

Hey, I don't seen anything posted I need but I sure could use a reworked ported set of exhaust manifolds for a 95. You did such a good job on the ones for my 90 you have a return customer. I might have a set of cores lined up in the next few days.

 

[tbird88]

Hey, I don't seen anything posted I need but I sure could use a reworked ported set of exhaust manifolds for a 95. You did such a good job on the ones for my 90 you have a return customer. I might have a set of cores lined up in the next few days.

I think there's about 6-7 sets of manifolds around here but none that are already ported, hope to port as many in advance as possible as soon as I can get settled into the new job. My work hours are different now, 7am-3:30pm and I can get a few things done in the afternoon before everyone closes at 5pm but girlfriend has volunteered to help pick up parts around town and ship when need be.
Gonna be a lil confusing over the next few weeks but it'll settle into some sort of pattern, then I can rock-n-roll. I'll keep addin' pics as I can sort out whatever seems like sumthin' anyone can use, some of it probably hasn't crossed anyone's mind but when they see the pic they'll think "hey, I been needin' one of those" or "don't see one of those off the car very often" and they'll buy it. Sound like a plan?

As far as 94/95 cores, not sure I have any in the pile. Saw some in somebody's ad here on the board for 94/95 stuff, they wanted 50 shipped I think.

thanks for the compliment!

'bird

 

[rickbtbird]

I'm getting a set of 94/95 cores today so they should be on there way to your place. I'll setup a paypal for the porting and coating too. Is the address on your site still valid or do you have a new one?

 

[tbird88]

I'm getting a set of 94/95 cores today so they should be on there way to your place. I'll setup a paypal for the porting and coating too. Is the address on your site still valid or do you have a new one?

PM sent

'bird

 

[youngfordfan61]

ircm

Got an ircm for a 93' 5 speed??
Maybe a factory cd player?
Thanks have a good day
mcw

 

[CMac89]

Do you have any DIS modules?

I need two definite good ones.

 

[tbird88]

Got an ircm for a 93' 5 speed??
Maybe a factory cd player?
Thanks have a good day
mcw

I guarantee there's a few IRCM's out there but they're 89-91, does anyone know what years will swap? I's figure 89 to 93 would all be the same but then again we ARE talkin' Super Coupes...

If they'll swap, IRCM will run ya $20

'bird

 

[tbird88]

Do you have any DIS modules?

I need two definite good ones.

Might be a tuffy to find where those are hidden, I'll try to check out in the garage.

'bird

 

[Rodeo Joe]

Wynn,

I'd be interested in one of those $10 SC intake tubes!

Joe

 

[90scman]

for a running sc how much?

how much are you looking to get for one of the running sc's. if you could give me details on those also it would be great. miles, colors, mods, new parts. Thanks don ps where are you located?

 

[youngfordfan61]

ircm

Hey,
If we can find out if it will interchange with my 93' you got 1 sold! I just dont know a way to find out, hope it works out! Anybody know if itll interchange? I see to you have cd wiring, is that to connect a stock cassette to the slave unit? If so is that the only wiring you need to run a slave unit?

 

[AMD[H]unter]

I don't really see anything I need here, but I do need a set of them ported manifolds for my '91. If I sent you my cores, what kind of time frame am I looking at to get them back, with you moving and all... Thanks!

 

[tbird88]

how much are you looking to get for one of the running sc's. if you could give me details on those also it would be great. miles, colors, mods, new parts. Thanks don ps where are you located?

I have one that I drove all the way up past Waco to Glen Rose to bring back home. Black w/Titanium cloth interior, automatic, needs a front bumper cover (got one I'm sure), drove it to the partshouse a few times in the past. Don't remember the mileage, it has an Indiana title.
700.00 - pic attached below

Other one is a running parts car, 65,000 original miles, less than 2,000 miles on rebuilt trans, new master cylinder. They ran it off in a culvert and trashed the front suspension, has a small crack in the oil pan. I welded the radius rods back together just to drive it around the yard, driverside window has been missing for over a year so the interior is funky. Local wrecker service I bought it from probably has the title.
600.00 - I have pics somewhere on my hardrive...

I'm just up the road in Beaumont

Drop me an email, maybe both of them can have a new home. Will trade either or both for firearms/ammo.

tbird88@datarecall(DOT)net

thanks,

'bird

 

[tbird88]

I don't really see anything I need here, but I do need a set of them ported manifolds for my '91. If I sent you my cores, what kind of time frame am I looking at to get them back, with you moving and all... Thanks!

Could be around 2 weeks, just got several orders for those, depends on whose cores show up first etc.

Keep your eyes open for more pics of parts, gonna slap 'em on here as often as I can and then update the thread.

thanks!

'bird

 

[CMac89]

Only if you lived closer to me I would buy one of those.

 

[speed95]

Wynn send me a email, Pm, or phone call and let me know what you want for the running SC's I might come take one or 2 off your hands.

Chris
iluv2speed95@aol.com

 

[Thomas A]

You have any poly diff mounts laying around Wynn??

Thomas

 

[tbird88]

You have any poly diff mounts laying around Wynn??

Thomas

No sir, got so labor intensive I couldn't get 'em exactly the way they needed to be. That, and I think I might've finally loosened up the one under Lola so didn't want to chance sendin' out something that would come back to haunt me such as replacing/refunding a dozen mounts.

Hopefully nobody mistreated theirs as bad as Lola did hers.

'bird

 

[tbird88]

Wynn send me a email, Pm, or phone call and let me know what you want for the running SC's I might come take one or 2 off your hands.

Chris
iluv2speed95@aol.com

Headed out to my NEW JOB and will do what I can to remember to email you tonight about them. Really a good deal, would be a waste to sell 'em locally because they're "just transportation" in this area.

'bird