Tons of parts for sale; lots of aftermarket go fast stuff

DrFishbone

SCCoA Member
1) does $150 sound fair for the QH?
2) $25 for the dis with the bottle of compound?
3) $70 for the oil separator? It's for a Mustang, but it worked well on my SC. I mounted mine right by the front airbox (right next to the rad), but I had also removed my A/C. It also caught a lot of water vapour, too. I still have the box that it came in with the mounting hardware, in case you can figure out a better place to mount it
4) $10?
5) $10?
6) if the deal falls through with the blower, for sure.....I'll give you first crack at it

I'm still at work, and when I get home, i'll upload a picture of the Moroso and how I mounted mine.

Thanks for the reply...looks like I snoozed on the QH. :(

Send me a PM if/when you'll sell the pulley separately. Some of the parts I asked about were just to build up spare parts inventory now that we may have 3 on the road soon.
 

mhaddad87

Registered User
not too sure

The MAF has a 42 lb sampling tube on it, so it's calibrated for 42 lb injectors.

I could be wrong but my maf has a calibration written on it, it is a pro flow, so granted it is different. I thought I have read that cl mafs still have a calibration. can you send pictures, also is it for a late model sc then?
 

1FSTBRD

Registered User
I could be wrong but my maf has a calibration written on it, it is a pro flow, so granted it is different. I thought I have read that cl mafs still have a calibration. can you send pictures, also is it for a late model sc then?

As far as I know, the MAF's between the late model and the early models are all the same and are compatible--the electronics are the same and the MAF fits the stock airbox, but the only calibration needed is the sampling tube--and the proper 42 lb sampling tube is what I have on this. I had bought this MAF off of a fellow member here a couple of years back, and he had a late model car. Here's a picture of the MAF and 42 lb injectors.

You will need to tune your car for the 42 lb injectors, or it won't run properly.

massairflowand42lbinjectors.JPG
 

mhaddad87

Registered User
thanks for the info

I think I am going to hold off for now. Just mulling over an e85 conversion and may go for different hardware. Thanks though.
 

mhaddad87

Registered User
parts

OP, where in Canada are you? I am in Halifax till Monday, can I purchase the screaming demon coil and 42lb maf from you and have it by then? 110 for both?
 

1FSTBRD

Registered User
OP, where in Canada are you? I am in Halifax till Monday, can I purchase the screaming demon coil and 42lb maf from you and have it by then? 110 for both?

I'm in Winnipeg but I doubt you'd get the stuff by Monday, without some sort of quick next day guarantee thing by some carrier. I can do $110 for the 42lb MAF and SD coil.
 
Last edited:

mhaddad87

Registered User
shipping

I'm in Winnipeg but I doubt you'd get the stuff by Monday, without some sort of quick next day guarantee thing by some carrier. I can do $110 for the 42lb MAF and SD coil.

Ok, probably have to ship to Vegas then. Can you give me a quote to 89144? Thanks.
 

mhaddad87

Registered User
yes

The MAF is sold now (someone had got back to me after a week and I wasn't sure if they were still interested). Did you still want the coil?

Yes I do, coil should fit inside a padded envelope just fine right? Can you give me payment info please?
 
Top